R Air return regulators serve the same function as the spring return type in that they control the forward speed of the drill. However, the air type requires an air signal at the end of each drilling cycle to return the regulator to its original position. Also, these regulators are required for peck feed drilling as they are capable of holding the drilling depth at the end of each peck feed motion.
Unit of Measure

Specifications

Type of Rod Return

N/A Air return

Type

N/A R

Maximum Stroke

N/A 3.94 inches (100 mm)

Load Range

N/A 480 - 990 lbs (220 - 450 kg)

Permissible Impact Load

N/A 4.30 (ft. lbs.) (0.6 kg.m)

Applicable Selfeeder Model

N/A ES6

Weight

N/A 4.2 kg9.26 lbs

Detail Chart

N/A

Model Range of Speed Control for each thrust in./sec. Range of Speed Control for each thrust mm/sec.
 
R-2442A F = 44 lbs. :0.01 - 0.20
F = 220 lbs. :0.02 - 0.98
F = 330 lbs. :0.03 - 1.18
F = 20kg :0.3 - 5
F = 100kg :0.5 - 25
F = 150kg :0.8 - 30
R-2462A
R-2482A
R-3182A
R-31132A
F = 220 lbs. :0.01 - 0.47
F = 480 lbs. :0.02 - 0.98
F = 660 lbs. :0.03 - 1.18
F = 100kg :0.3 - 12
F = 220kg :0.5 - 25
F = 300kg :0.8 - 30
R-38100AC F = 480 lbs. :0.01 - 0.58
F = 840 lbs. :0.02 - 0.98
F = 990 lbs. :0.03 - 1.18
F = 220kg :0.3 - 15
F = 380kg :0.5 - 25
F = 450kg :0.8 - 30
R-55100A F = 880 lbs. :0.01 - 0.59
F = 2200 lbs. :0.02 - 1.38
F = 400kg :0.2 - 15
F = 1000kg :0.6 - 35
R-55150A

Features

N/A

  • With the position of the piston rod maintained along the strokes as desired efficient pack feed drilling is possible.
  • Longer strokes available for extended application purpose.