• Electro-Mechanical synchronized tapping unit
  • Rapid approach, pitch feed distance, and total stroke mechanically adjustable
  • Capable of class 3 thread accuracy
Unit of Measure

Specifications

Type

N/A Induction Motor

Spindle Speed (No Load)

N/A 2,100
1,440
900
6210

Aluminum Tap Size (ADC) - 1 Spindle (in)

N/A #6
#8
#12
1/4

Aluminum Tap Size (ADC) - 1 Spindle (mm)

N/A M4
M5
M6
M8

Aluminum Tap Size (ADC) - 2 Spindle (in)

N/A #4
#6
#8
#12

Aluminum Tap Size (ADC) - 2 Spindles (mm)

N/A M3
M4
M5
M6

Carbon Steel Tap Size (S45C) - 1 Spindle (in)

N/A #4
#6
#8
#12

Carbon Steel Tap Size (S45C) - 1 Spindle (mm)

N/A M3
M4
M5
M6

Carbon Steel Tap Size (S45C) - 2 Spindles (in)

N/A #1
#3
#6
#8

Carbon Steel Tap Size (S45C) - 2 Spindles (mm)

N/A M2
M4
M5
M3

Fast Approach Stroke

N/A .407~2.95 in10~75 mm

Full Stroke

N/A .47~3.15 in12~80 mm

Motor Output

N/A 0.47hp 0.35 kW

Weight

N/A 60 lbs27 kg

Note

N/A

1. Tapping capacities are for three flute #2 hand taps and 80% thread. Refer to the Synchrotapper catalog when using spiral flute or spiral point taps (for through-hole tapping). Contact a Sugino representative when using roll form, pipe taps, etc.
2. Tapping capacities are limited to 1.5 times the tap diameter.
3. The maximum allowable weight of multi-spindle heads to be attached to Synchro-Tappers is as follows: Horizontal working direction: 32 lbs. (15 kg), Vertical up working direction: 22 lbs. (10 kg), Vertical down working direction: 17 lbs. (8 kg)
4. When mounted spindle up, protect the unit against coolant and debris with customer-supplied guarding.
5. When ordering provide the unit model number, spindle rpm, primary input voltage (220 - 240V), tap size and thread pitch, and spindle type.