Request Information
  • Powerful 3 HP spindle motor for large tapping capacity
  • Programmable second origin for faster cycle times
  • Forward and return rotation controlled with Frequency Inverter
Unit of Measure

Specifications

Type

 N/A Induction Motor

Spindle Speed (No Load)

 N/A 420
310
210

Aluminum Tap Size (ADC) - 1 Spindle (in)

 N/A 1
1-1/8
1-3/8

Aluminum Tap Size (ADC) - 1 Spindle (mm)

 N/A M27
M33
M36

Aluminum Tap Size (ADC) - 2 Spindle (in)

 N/A 3/4
7/8
1

Aluminum Tap Size (ADC) - 2 Spindles (mm)

 N/A M20
M22
M27

Carbon Steel Tap Size (S45C) - 1 Spindle (in)

 N/A 9/16
5/8
7/8

Carbon Steel Tap Size (S45C) - 1 Spindle (mm)

 N/A M16
M20
M22

Carbon Steel Tap Size (S45C) - 2 Spindles (in)

 N/A 7/16
9/16
5/8

Carbon Steel Tap Size (S45C) - 2 Spindles (mm)

 N/A M12
M16

Full Stroke

 N/A .79~3.94 in20~100 mm

Motor Output

 N/A 2.95hp 2.2 kW

Weight

 N/A 386 lbs175 kg

Note

 N/A

1. Tapping capacities are for three flute #2 hand taps and 80% thread. Refer to the Synchrotapper catalog when using spiral flute or spiral point taps (for through-hole tapping). Contact a Sugino representative when using roll form, pipe taps, etc.
2. Tapping capacities are limited to 1.5 times the tap diameter.
3. The maximum allowable weight of multi-spindle heads to be attached to Synchro-Tappers is as follows: Horizontal working direction: 220 lbs. (100 kg), Vertical up working direction: 200 lbs. (90 kg), Vertical down working direction: 200 lbs. (90 kg)
4. When mounted spindle up, protect the unit against coolant and debris with customer-supplied guarding.
5. When ordering provide the unit model number, spindle rpm, primary input voltage (220 - 240V), tap size and thread pitch, and spindle type.
6. STE units are not equipped with a fast approach function