• Unit with built-in fast-forward/return mechanism
  • Long stroke up to 4.7 inches
  • Change thread pitch feed using feed gear
  • Provided with energy efficient motor 
Unit of Measure

Specifications

Type

 Premium Motor

Spindle RPM (60Hz)

 1,100
690
420
260

Aluminum Tap Size (ADC) - 1 Spindle (in)

 1/4
1/4
3/8
7/16

Aluminum Tap Size (ADC) - 1 Spindle (mm)

 M8
M8
M10
M12

Aluminum Tap Size (ADC) - 2 Spindle (in)

 #8
#12
1/4
3/8

Aluminum Tap Size (ADC) - 2 Spindles (mm)

 M5
M6
M8
M10

Carbon Steel Tap Size (S45C) - 1 Spindle (in)

 #8
#12
1/4
3/8

Carbon Steel Tap Size (S45C) - 1 Spindle (mm)

 M5
M6
M8
M10

Carbon Steel Tap Size (S45C) - 2 Spindles (in)

 #6
#8
#12
1/4

Carbon Steel Tap Size (S45C) - 2 Spindles (mm)

 M4
M5
M6
M8

Fast Approach Stroke

 .407~2.95 in10~75 mm

Full Stroke

 .47~3.15 in12~80 mm

Motor Output

 1.0hp 0.75 kW

Weight

 60 lbs27 kg

Theoretical Spindle Torque

 2.84ft.lbs(3.85N·m)
4.59ft.lbs(6.22N·m)
7.35ft.lbs(9.97N·m)
11.88ft.lbs(16.10N·m)

Note

1. Tapping capacities are for three flute #2 hand taps and 80% thread. Refer to the Synchrotapper catalog when using spiral flute or spiral point taps (for through-hole tapping). Contact a Sugino representative when using roll form, pipe taps, etc.
2. Tapping capacities are limited to 1.5 times the tap diameter.
3. The maximum allowable weight of multi-spindle heads to be attached to Synchro-Tappers is as follows: Horizontal working direction: 32 lbs. (15 kg), Vertical up working direction: 22 lbs. (10 kg), Vertical down working direction: 17 lbs. (8 kg)
4. When mounted spindle up, protect the unit against coolant and debris with customer-supplied guarding.
5. When ordering provide the unit model number, spindle rpm, primary input voltage (220 - 240V), tap size and thread pitch, and spindle type.