Sugino Corp.
Sugino Corp.
1380 Hamilton Pkwy. Itasca, IL 60143
Toll Free: 888.SUGINO1/888.784.4661
Phone: 630.250.8585
Fax: 630.250.8665
Email: mach@suginocorp.com
Print Back
Diamond tip type burnishing tool, CAT'S EYE can be applied to hard materials up to HRC 60. Throw-away tip enables quick and easy replacement.
  • For outer and end surfaces
CEO-4D1R-S25
CEF-4D1R-S25
Unit of Measure
Items CEO-4D1R-S25
CEO-4D1R-S25
Cat's Eye S Surface 		CEO-4D1R-S25
CEO-4D1L-S25
Cat's Eye S Surface 		CEF-4D1R-S25
CEF-4D1R-S25
Cat's Eye S Surface 		CEF-4D1R-S25
CEF-4D1L-S25
Cat's Eye S Surface
Processing Section N/A Outer Surface N/A Outer Surface N/A End Surface N/A End Surface
Shank Diameter (in) N/A Ø0.984
Shank (mm²) N/A 16 20
Handed Direction N/A Right Handed N/A Left Handed N/A Right Handed N/A Left Handed
Work Piece Material N/A N/A Suj2(HRC60 N/A N/A
Work Piece Inner Diameter (in) N/A N/A 0.512 N/A N/A
Surface Roughness (Ry µ inch) N/A Before burnishing ~ 4.0 (Rz), ~ 157 (Ry) N/A After burnishing 15.74 Ry, 0.4 Rz Before burnishing 15.48 Ry, 4.0 Rz N/A Before burnishing ~ 4.0 (Rz), ~ 157 (Ry) N/A
Work Piece Hardness (HRC) N/A 45 N/A N/A 60 N/A
Peripheral Velocity (ft/min) N/A 165~650 N/A 325 N/A 165~650 N/A
Feed (in/rev) N/A 0.002 N/A 0.001 N/A 0.002 N/A
Spring Load (lbs) N/A 9 N/A 200 N/A 45 N/A
Tip Type and Number N/A DT4D1