• Available spindle options
    • Intergral collet spindle : ER8
  • Spindle and body air purge
  • Capable of peck feed motion
Unit of Measure

Specifications

Type

N/A Air Feed/Electric Rotation

Motor Output

N/A 0.27hp

Aluminum Drill Size

N/A 3/32 in2.5 mm

Cast Iron Drill Size

N/A 3/64 in1 mm

Mild Steel Drill Size

N/A 3/64 in1 mm

Thrust

N/A 110 lbs490 N

Spindle Taper

N/A JT1

Weight

N/A 14 kg 31 lbs

Operating Air Pressure

N/A 72 psi

Air Consumption

N/A 0.07

Theoretical Spindle Torque

N/A 4,980 ~ 9,960 RPM(Rated Torque): 0.14 ft.lbs (0.19 N·m)
Over 9,960~12,000RPM(Rated Power)

Drill Chuck Capacity

N/A 1/8 in3 mm

Note

N/A

1. The selection of models should be based on the shape of the work, material, cutting characteristics, diameter and material of tools, rotational speed (cutting speed), etc.
2. The drilling capacity displayed in the above table is based on values representing a drilling depth of twice the diameter of the drill.
3. The RB-2430 comes standard with a Hydro Speed Regulator.
A Hydro Speed Regulator is available as an option upon request.
(Optional Hydro Speed Regulator models are: RB-2460, R-2442A, R-2462A, and R-2482A)
4. Make sure to use a collet chuck or spindle nose when the hardness of carbide drills and tool shanks is higher than that of general HSS (high-speed steel) drills.
5. Valveless specification is standard. If you require valve block specification (former standard specification), please order valve block ass'y separately. (Replacement to be made by customer)

Spindle RPM range

N/A 4,980~12,000