Request Information
  • Available spindle options
    • Integral collet spindle:ER11, ER20
    • Quick change ASA and KH spindle types
  • Spindle and body air purge
  • Capable of peck feed drilling
  • Long stroke version is available
Unit of Measure

Specifications

Type

 N/A Air Feed/Electric Rotation

Motor Output

 N/A 2.0hp

Aluminum Drill Size

 N/A 19/32 in15 mm

Cast Iron Drill Size

 N/A 33/64 in13 mm

Mild Steel Drill Size

 N/A 7/16 in11 mm

Thrust

 N/A 337 lbs1500 N

Spindle Taper

 N/A JT1

Weight

 N/A 35kg 77lbs

Operating Air Pressure

 N/A 72 psi

Air Consumption

 N/A 0.211 to 0.353

Theoretical Spindle Torque

 N/A 430 ~ 860 RPM(Rated Torque): 12.35ft.lbs (16.75 N·m)
Over 860~1,030RPM(Rated Power)

Drill Chuck Capacity

 N/A 33/64 in13 mm

Unit Options

 N/A Economy Valve Block Peck Feed Spindle - ER, KH and ASA types Spindle and Body Air Purge

Note

 N/A

1. The selection of models should be based on the shape of the work, material, cutting characteristics, diameter and material of tools, rotational speed (cutting speed), etc.
2. The drilling capacity displayed in the above table is based on values representing a drilling depth of twice the diameter of the drill.
3. The standard attachment for the Hydro Speed Regulator is RB-3140.
Please specify an optional Hydro Speed Regulator if required.
(Optional Hydro Speed Regulator Models: RB-3160, R-3182A, R-31132A)
4. Make sure to use a collet chuck or spindle nose when the hardness of carbide drills and tool shanks is higher than that of general HSS (high-speed steel) drills.
5. Valveless specification is standard. If you require valve block specification (former standard specification), please order valve block ass'y separately.
(Replacement to be made by customer)

Spindle RPM range

 N/A 430~1,030