• Product Image - Diamond Superoll DSR Series
Diamond Superoll tools provide "mirror" surface finishes in material up to 60 Rockwell C in hardness.
The interference area of the tool includes a clearance of 0.020 inches (0.5mm).
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Model #

Diamond Tip Configuration

Mandrel Model

Interference Area

Angular Contact Range (Allowable)

Shank Angle

N/A 0.059 inches (1.5 mm) N/A DR-1.5 N/A 0.079 inches (2 mm) N/A ±30º N/A 60º
N/A 0.059 inches (1.5 mm) N/A DR-1.5 N/A 0.079 inches (2 mm) N/A ±30º N/A 30º
N/A 0.059 inches (1.5 mm) N/A DR-1.5 N/A 0.079 inches (2 mm) N/A ±30º N/A 45º
N/A 0.059 inches (1.5 mm) N/A DR-1.5 N/A 0.079 inches (2 mm) N/A ±30º N/A Straight
N/A 0.118 inches (3 mm) N/A DR-3 N/A 0.138 inches (3.5 mm) N/A ±30º N/A 60º
N/A 0.118 inches (3 mm) N/A DR-3 N/A 0.138 inches (3.5 mm) N/A ±30º N/A 30º
N/A 0.118 inches (3 mm) N/A DR-3 N/A 0.138 inches (3.5 mm) N/A ±30º N/A 45º
N/A 0.118 inches (3 mm) N/A DR-3 N/A 0.138 inches (3.5 mm) N/A ±30º N/A Straight
N/A 0.0315 inches (8 mm) N/A DR-8 N/A 0.178 inches (4.5 mm) N/A ±1.5º N/A 60º
N/A 0.0315 inches (8 mm) N/A DR-8 N/A 0.178 inches (4.5 mm) N/A ±1.5º N/A 30º
N/A 0.0315 inches (8 mm) N/A DR-8 N/A 0.178 inches (4.5 mm) N/A ±1.5º N/A 45º
N/A 0.0315 inches (8 mm) N/A DR-8 N/A 0.178 inches (4.5 mm) N/A ±1.5º N/A Straight
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1